PIPELINE EQUIPMENT SOLUTIONS

Pipeline pigging equipment

Pipeline pigging equipment is selected around the task, pipeline configuration, service conditions and the available launching and receiving arrangements. The physical pig, its sealing and cleaning components as well as any associated tracking equipment are all considered as parts of the pig selection requirements.

Tremco Pipeline Equipment supplies pipeline pigs and related equipment for oil, gas, water, mining and petrochemical applications. This page helps organise the available product routes; it does not replace current manufacturer data, an approved operating procedure or project-specific technical review.

Start with the pigging task

01

Cleaning and debris removal

Cleaning requirements can vary according to the product, the material to be removed, the internal condition of the line and any known fittings, branches, valves and restrictions. Any available pipeline data and run history can help a product specialist determine correct pig selection.

02

Batching, dewatering or product removal

Where a pig is being considered to separate products, displace a product or support dewatering work, provide the intended outcome and the available operating and pipeline information. Do not assume that a cleaning-pig configuration is suitable for another task.

03

Gauging and line-condition checks

If the job includes gauging or another defined check, identify the project requirement and any applicable procedure or acceptance criteria. Tremco Pipeline Equipment can route the enquiry to relevant equipment information, but the asset owner and its competent advisers remain responsible for the method and acceptance decision.

Girard Turbo Pigs in several sizes

01

Foam and polyurethane pig routes

Tremco Pipeline Equipment’s Girard catalogue includes Polly Pigs and Turbo Pigs. Use the current product pages and manufacturer information to compare construction, configuration and application details.

Girard mandrel pigs with replaceable red cups and discs

02

Configured and custom pig routes

For requirements that need a configured body, sealing or cleaning arrangement, review Girard custom-made pigs and the broader Girard Industries range. Configuration must be assessed against the actual line and task.

Girard’s range also includes mandrel pigs with replaceable components and configurable accessories. Include the application and line details with the enquiry so the applicable current family information can be reviewed.

Polyurethane pipeline spheres in red, green and yellow

03

Spheres, cups and discs

Explore polyurethane spheres and cups and discs as distinct component or equipment routes. Check current dimensions, materials and compatibility using the applicable product page and manufacturer information.

Girard pigs for pig-valve systems

04

Pigs for pig-valve systems

Pig-valve pigs have their own system context. Confirm the valve, pig and current manufacturer requirements together rather than treating them as interchangeable with a conventional launch-and-receive arrangement.

Information to provide with a pigging-equipment enquiry

Share the information that is available and appropriate to disclose. A useful starting point includes:

  • the intended task and required outcome;
  • the pipeline product or service;
  • nominal diameter and any available internal-diameter information;
  • line length, configuration and known bends, valves, restrictions or changes in bore;
  • launcher and receiver arrangements;
  • previous pigging history and any known run issues;
  • available information about debris, deposits or contaminants;
  • operating information relevant to product assessment;
  • project location and required timing; and
  • whether tracking or passage confirmation is required.

This information begins the assessment; it is not a complete selection method. Further technical, operational or engineering information may be required.

Pig tracking is a separate equipment decision

A physical pig and its tracking or passage-detection equipment perform different functions. If the project needs transmitters, receivers, passage signallers or above-ground monitoring, review the dedicated tracking pathway and confirm component compatibility.

Explore pipeline pig tracking equipment

Questions about pipeline pigging equipment

Is one pig type suitable for every pipeline task?

No. The task, line configuration, service, internal restrictions, run history and operating requirements can change which equipment family should be reviewed. Product selection must use current manufacturer information and the project’s technical process.

Is pig tracking equipment included with a pipeline pig?

Do not assume that it is. Transmitters, receivers, signallers and monitoring equipment have their own compatibility, configuration and availability requirements. Confirm the complete tracking need separately.

What does this page cover?

This page covers Tremco Pipeline Equipment’s equipment-supply and product-guidance role. Confirm any separately scoped operational service requirement directly with Tremco Pipeline Equipment.

What should be included in an initial enquiry?

Start with the task, location and required date, then use the enquiry checklist above for the pipeline details already available. Note anything unknown so Tremco Pipeline Equipment can identify what needs clarification.

Discuss a pipeline pigging equipment requirement

Send Tremco Pipeline Equipment the available project information and identify what the pigging run needs to achieve. The team can direct the enquiry to the relevant equipment family and current product information.

Discuss a pipeline pigging equipment requirement

Browse Girard pipeline pig products