16-18″ Internal Pneumatic Clamp (IPC16-18)


The 16-18" Internal Pneumatic Clamp (IPC16-18) is an internal pneumatic line-up clamp for aligning adjoining pipe ends before welding. The model-specific features and technical specifications are listed below.

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • Filters, lubricators, regulators and valves all rated to 250 psi
  • Fully hardened dowel pins
  • Nose cone made of seamless 4130 steel for durability
  • Clamp frame is built using 11⁄2″ x 3⁄8″ angle iron to create a strong, durable frame
  • Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
  • Darby uses only the highest quality high pressure quick exhausts
  • Air tubes are electro statically plated to reduce corrosion
  • Two Stage Stainless Steel Air Tank: Rigid mounted air tank for 40′ joints; Large trailer tank for 60′ and 80′ joints available
  • Remote operated by reach rod
  • Most clamps can cover two pipe sizes through the use of conversion kits
  • All powered clamps have a 25° climbing capability
  • Powered line travel on models 16″ to 60 ” for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range 16″ – 18″ (406 – 457 mm)
Wall Thickness Range .125″ – .500″ (3.18 – 12.7 mm) on 16″ (406 mm)
.125″ – .750″ (3.18 – 19.0 mm) on 18″ (457 mm)
Standard Length 100″ (2540 mm)
Width 14″ (356 mm)
Height 14″ (356 mm)
Weight 545 lbs (247 kg)
Working Air Pressure 180 – 220 psi
Air Motor .9 hp Cleco
Air Tank 10 gal w/ 3 gal reserve
Clamping Shoes 16 total clamp shoes, 8 on each section
Cylinder 8″ (203 mm)
Climbing Capacity 25° + slope

Discuss your requirements

Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.

Contact Tremco Pipeline Equipment