RCSL Corrosion Monitoring

Model SP7000 – Sand Probe

The SP7000 detects sand-related erosion in flow lines through a thin-walled sensing element. When particles penetrate the element, process pressure reaches a gauge or optional electronic alarm sensor.

RCSL Model SP7000 - Sand Probe

Product information

View Model SP7000 – Sand Probe on the RCSL website for manufacturer details. Check the current documentation for the selected model and configuration.

Technical information and selection

The sand probe connects to a tee-type high-pressure fitting and solid plug. Erosion penetrates a sealed thin-walled tube, allowing process pressure to reach the gauge via the fitting, nipple and shut-off valve. A separately sourced electronic pressure sensor may replace the gauge for an alarm interface.

Specification Catalogue detail
Body Stainless steel
Temperature 260°C /500°F
Pressure 3600 psi /245 bar (as stated by manufacturer)
Mounting Two-inch access system with solid plug
Minimum order length 3.75 inches; 1/4-inch increments
Mounting/tube materials 316, C276 or Duplex2205
Tube wall thickness 0.016, 0.028 or 0.035 inch
1/4-inch NPT gauge code 700743

Specify mounting material, tube material, wall thickness and order length. The shut-off valve and nipple must match the access-fitting tee; the catalogue lists1/4, 1/2, 3/4 and 1-inchNPT options. Other than 1/4-inch fittings require a different gauge or thread adaptor. The separate valve’s rated pressure does not increase the probe’s stated rating.

Source: RCSL Product Catalogue 2019, PDF pages 164, 165. Confirm current specifications and the complete assembly configuration before ordering.

Discuss your requirements

Include the model, intended application, process conditions and existing connection details in your enquiry. Confirm suitability, the current manufacturer documentation and availability with Tremco before specifying or ordering equipment.

Contact Tremco Pipeline Equipment