PIPELINE PROTECTION & INSPECTION
Pipeline corrosion prevention and control equipment
Coatings, cathodic-protection connections, test stations and inspection tools for pipeline projects.
Holiday detectors are included in our confirmed equipment hire offering. Contact us to confirm current availability
SELECT WITH CONFIDENCE
Corrosion-control equipment guidance
Pipeline corrosion control involves coatings (external and internal), cathodic-protection, corrosion monitoring, corrosion inhibitor injection and coating inspection. Tremco Pipeline Equipment supplies specialist equipment and products for these tasks across oil, gas, water, mining and petrochemical pipeline applications.
Choose equipment by corrosion-control task
01
Pipeline coatings
Different coatings can be used as mainline corrosion protection coating, internal erosion or corrosion protection, joint coatings and for repairs. Explore the current liquid coatings and tape wrap systems Tremco Pipeline Equipment offer from TIB Chemicals Protegol liquid coating range and Coatec Altene anti corrosion tape coatings, then check the applicable product sheet, surface-preparation requirements, application method and compatibility for the project.
Do not select a coating solely from an overview page. The product, temperature, substrate, service environment/soil conditions , existing coating system, application conditions and project specifications all need to be considered.
02
Cathodic-protection, Corrosion monitoring and supporting equipment
The BAC Corrosion Control and RCSL Corrosion Monitoring range provides equipment and consumables associated with cathodic-protection , Corrosion monitoring, chemical injection and sampling equipment for the pipeline industry.
Provide the intended cp or monitoring requirement, asset details, site conditions and project requirements so the relevant products can be identified. Design, installation procedure, electrical suitability and acceptance remain subject to competent technical review.
03
Cathodic-protection test stations
Cott Manufacturing test-station products provide routes for cathodic-protection test access. The enclosure, terminal arrangement, identification, location and installation details depend on the monitoring design and project specification.
04
Coating inspection and holiday detection
A holiday detector is used to identify defects/discontinuities in a non-conductive coating over a conductive substrate. The SPY Holiday Detectors range includes products for different coating-inspection requirements.
The correct detector is selected based on output setting required for coating system and thickness, applicable standard, current manufacturer instructions and the project’s approved inspection procedure.
RCSL · CORROSION MONITORING
Corrosion monitoring equipment
Access systems, probes, instrumentation and supporting equipment.
SPY · COATING INSPECTION
Portable holiday detectors
High-voltage DC, high-voltage pulse and low-voltage wet-sponge models.
Portable – High Voltage DC
Portable – High Voltage Pulse
Portable – Low Voltage Wet Sponge
Portable – High Voltage Pulse
SPY · COATING INSPECTION
In-plant holiday detectors
In-plant models for DC, pulse, wet-sponge and rebar inspection.
In-Plant High Voltage DC
In-Plant High Voltage Pulse
In-Plant Rebar
In-Plant Low Voltage Wet Sponge
In-Plant High Voltage Pulse
In-Plant Rebar
In-Plant Rebar
SPY HOLIDAY DETECTORS · EQUIPMENT RANGE
JeepMeter
SPY meters for checking holiday-detector output.
SPY HOLIDAY DETECTORS · EQUIPMENT RANGE
Pig Tracking
Transmitters, tracking systems and receivers from the SPY range.
Transmitters
Tracking Systems
Receivers
Transmitters
Tracking Systems
Receivers
Transmitters
Tracking Systems
Receivers
Transmitters
Tracking Systems
SPY HOLIDAY DETECTORS · EQUIPMENT RANGE
Electrodes
Spring, brush, sponge and conductive-rubber inspection electrodes.
TIB Chemicals · EQUIPMENT RANGE
Polyurethane Coatings
PROTEGOL polyurethane coating and repair products.
PROTEGOL® PU Repair
Product information
PROTEGOL® PU Repair is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002. Application is made by mechanical operating dispenser. The product can also be used to repair factory and field coatings.
Product Sheet: PROTEGOL® PU Repair
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Field joints
- Metal surfaces prone to corrosion
- Bonding of anodes in cathodic corrosion protection
Benefits:
- Very fast reaction and curing time
- Easy to use
- No waste of material
- Excellent corrosion protection
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-45
Product information
PROTEGOL® UR Coating 32-45 is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290, 08.2004, AWWA C222-99, Real Decreto 118/2003. Application is made by 2K airless spray system.
Product Sheet: PROTEGOL® UR Coating 32-45
Uses: Internal and external coating of :
- Pipes, pipe bends
- Fittings
- Tanks, containers
- Piling pipes
Benefits:
- Good corrosion protection
- Abrasion-resistant and impact-resistant
- Good chemical resistance
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-45/55 L
Product information
PROTEGOL® UR Coating 32-45/55 L is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002. Application is made by Spatula, knife or Brush. The product is a complementary product to PROTEGOL® UR Coatings for manual processing.
Product Sheet: PROTEGOL® UR Coating 32-45/55 L
Uses: Coating of
- Field joints
- Pipes, pipe bends
- Fitting
- Tanks, containers
- Repair of coating imperfections
- Stripe coating of parts of complex shape-environment
Benefits:
- Excellent corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-45/55 L Cartridge
Product information
PROTEGOL® UR Coating 32-45/55 L Cartridge is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002. Application is made by spatula, knife or brush. The product is a complementary product to PROTEGOL® UR Coatings for manual processing.
Product Sheet: Coating 32-45/55 L Cartridge
Uses: Coating of
- Field joints
- Pipes, pipe bends
- Tanks, containers
- Repair of coating imperfections
- Stripe coating of parts of complex shape-environment
Benefits:
- Excellent corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-45 R
Product information
PROTEGOL® UR Coating 32-45 R Systems is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002.
Application is made by 2K airless hot spray system. The product is available in various rheological settings that were developed for special processing requirements without affecting the product itself.
Uses: Internal and external coating of:
- Pipes, pipe bends
- Fittings
- Tanks, containers
- Piling pipes Benefits:
- Good corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: Polyurethane
PROTEGOL® UR Coating_32-45_R_Cartridge
Product information
PROTEGOL® UR Coating 32-45 R Cartridge is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002. Application is made by Air-assisted pneumatic gun.
Product Sheet: PROTEGOL® UR Coating 32-45 R Cartridge
Uses: External coating of
- Field joints
- Pipes, pipe bends
- Tanks, containers
Benefits:
- Excellent corrosion protection
- Abrasion-resistant and impact-resistant
- Easy to use
- Good chemical resistance
- No need for solvents
-
Substance name: polyurethane
PROTEGOL® UR Coating_32-45_R_Systems
Product information
PROTEGOL® UR Coating 32-45 R Systems is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002. Application is made by 2K airless hot spray system. The product is available in various rheological settings that were developed for special processing requirements without affecting the product itself. Contact the TIB Chemicals sales team for information.
Product Sheet: PROTEGOL® UR Coating 32-45 R Systems
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Tanks, containers
- Piling pipes
Benefits:
- Good corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-45 TH
Product information
PROTEGOL® UR Coating 32-45 TH is a two-component polyurethane coating. Application is made by 2K airless hot spray system.
Product Sheet: PROTEGOL® UR Coating 32-45 TH
Uses Interrnal and external coating of:
- Pipes
- pipe bends
- Fittings
- Tanks, containers
Benefits:
- Good corrosion protection
- Abrasion-resistant and impact-resistant
- Good chemical resistance
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-46
Product information
PROTEGOL® UR Coating 32-46 is a two-component polyurethane coating. The product meets the requirements of AWWA C222-18, Commission Regulation (EU) No 10/2011, Royal Decree 847/2011. Application is made by 2K airless hot spray system.
Product Sheet: PROTEGOL® UR Coating 32-46
Uses:
- Internal and external coating
- Pipes, pipe bends
- Fittings
Benefits:
- Good impact resistance
- Abrasion resistant
- Good corrosion protection
- Good chemical resistance
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-55 PN
Product information
PROTEGOL® UR Coating 32-55 PN is a two-component polyurethane coating. The product meets the requirements of ISO 21809-3:2020. Application is made by 2K airless hot spray system. PROTEGOL® UR Coating 32-55 PN has a high resistance against cathodic disbonding even at higher temperatures.
Product Sheet: PROTEGOL® UR Coating 32-55 PN
Uses: Coating of
- Field joints
Benefits:
- Excellent corrosion protection
- High resistance against cathodic disbonding up to 95° C
- Abrasion-resistant and impact-resistant
- High temperature resistance
- Good adhesion to steel
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-55 R
Product information
PROTEGOL® UR Coating 32-55 R Systems is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290, 08.2004, DIN 3476-2:2018-08. Application is made by 2K airless hot spray system. The product is available in various rheological settings that were developed for special processing requirements without affecting the product it self.
Product Sheet: PROTEGOL® UR Coating 32-55 R Systems
Uses: Internal and external coating of:
- Pipes, pipe bends
- Fittings
- Piling pipes
- Tanks, containers
Benefits:
- Good corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-55 R Systems
Product information
PROTEGOL® UR Coating 32-55 R Systems is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290, 08.2004, DIN 3476-2:2018-08. Application is made by 2K airless hot spray system. The product is available in various rheological settings that were developed for special processing requirements without affecting the product itself. Contact the TIB Chemicals sales team for information.
Product Sheet: PROTEGOL® UR Coating 32-55 R Systems
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Piling pipes
- Tanks, containers
Benefits:
- Good corrosion protection
- Abrasion resistant
- Impact resistant
- Good chemical resistance
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-55 TD
Product information
PROTEGOL® UR Coating 32-55 TD is a two-component polyurethane coating for machine processing. The product meets the requirements of DIN EN 10290:2002. Application is made by 2K airless hot spray system. PROTEGOL® UR Coating 32-55 TD can also be processed with 1K airless equipment or roller; please contact TIB Chemicals for details.
Product Sheet: PROTEGOL® UR Coating 32-55 TD
Uses:
External coating of
- Pipes, pipe bends
- Fittings
- Tanks, containers
Benefits:
- Good corrosion protection
- Abrasion resistant
- High chemical resistance
- High chemical resistance
- Accomplishes DIN EN 10290
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-60
Product information
PROTEGOL® UR Coating 32-60 is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002, DIN 3476-2:2018-08, DIN EN ISO 21809-3:2020-09, AWWA C222-18. Application is made by 2K airless spray system.
Product Sheet: PROTEGOL® UR Coating 32-60
Uses:
Internal and external coating of
- Pipes, pipe bends
- Fittings
- Field joints
- Tanks, containers
Benefits:
- Excellent corrosion protection
- Very fast reaction and curing time
- Quick development of mechanical capacity
- Easy to use
- Applied with impingement gun – no solvent flushing necessary
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-60 Cartridge
Product information
PROTEGOL® UR Coating 32-60 Cartridge is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002, DIN 3476-2:2018-08, DIN EN ISO 21809-3:2020-09, AWWA C222-18. Application is made by 2K airless spray system.
Product Sheet: PROTEGOL® UR Coating 32-60 Cartridge
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Field joints
- Tank
- container
Benefits:
- Excellent corrosion protection
- Very fast reaction and curing time
- Quick development of mechanical capacity Easy to use
- Applied with impingement gun – no solvent flushing necessary
-
Substance name: polyurethane
PROTEGOL® UR Coating 32-68 PW
Product information
PROTEGOL® UR Coating 32-68 PW is a two-component polyurethane coating. The product meets the requirements of UBA Guidline (UBA Beschichtungsleitlinie), DVGW W 270, 11.1999. Application is made by 2K airless hot spray system.
PROTEGOL UR Coating 32-68 PW is applied as internal or external coating of cast iron pipes, fittings and accessories, it can also be processed with cartridge system. In colour RAL 1014 drinking water approved by independent laboratory.
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Tanks, containers
- Valves
-
Substance name: Polyurethane
PROTEGOL® UR Coating 32-69 MB
Product information
PROTEGOL® UR Coating 32-69 MB is a two-component polyurethane coating. The product meets the requirements of DIN EN 10290:2002, DIN EN 15189, KTW-BWGL, ÖNORM B5014 Part 1, AWWA C222-18. Application is made by 2K airless hot spray system.
Product Sheet: PROTEGOL® UR Coating 32-69 MB
Benefits:
- Excellent corrosion protection
- High resistance to cathodic infiltration up to 80°C
- Fast mechanical capacity
- Very fast reaction and curing time
- good chemical resistance
- good water resistance
-
Substance name: Polyurethane
TIB Chemicals · EQUIPMENT RANGE
Epoxy Coatings
PROTEGOL epoxy coating products and technical information.
PROTEGOL® EP Coating 32-99
Product information
PROTEGOL® EP Coating 32-99 is a solvent-free twocomponent epoxy coating. The product is applied by two component airless hot spray or one-component airless equipment. Bending of the pipes after applying the coating is not intended.
Product Sheet: PROTEGOL® EP Coating 32-99
Benefits:
- Solvent-free
- Fast-curing
- Coating thickness up to 900 μm per operation
PROTEGOL® EP Coating32-89 S
Product information
PROTEGOL® EP Coating 32-89 S is a two-component epoxy coating. The product meets the requirements of DIN EN 10289:2004-08. Application is made by 2K airless spray system. Handling of the coated pipes must be in accordance with DIN EN 10289: 2004-08, para.
Product Sheet: PROTEGOL® EP Coating 32-89 S
Uses: External coating of
- Pipes, pipe bends
- Fittings
- Tanks, container
Benefits:
- Excellent corrosion protection
- Good adhesion to steel
- Abrasion-resistant and impact-resistant
- Good chemical resistance
PROTEGOL® EPN 180
Product information
PROTEGOL® EPN Coating 180 is a two-component epoxy-phenol-novolac coating. The product meets the requirements of DIN EN 10289:2002. Application is made by 2K airless spray system.
Product Sheet: PROTEGOL® EPN Coating 180
Uses: External coating of
- Pipes, pipe bends
- Fittings
- Field joints
- Tanks, containers
Internal coating of
- Pipes, pipe bends
Benefits:
- Abrasion and impact-resistant
- High temperature resistance
- High resistance against cathodic disbonding up to 180 °C
- Good chemical resistance
PROTEGOL® UR Coating 32-89_S-L
Product information
PROTEGOL® EP Coating 32-89 S-L is a two-component epoxy coating. The product meets the requirements of DIN EN 10289, 02.2002. Application is made by Spatula, knife.
Product Sheet: PROTEGOL® EP Coating 32-89 S-L
Uses: Internal and external coating of
- Pipes, pipe bends
- Fittings
- Tanks, containers
Benefits:
- Excellent corrosion protection
- Good adhesion to steel
- Abrasion-resistant and impact-resistant
- Good chemical resistant
Product and technical pathways
Consult the applicable product page and current manufacturer documentation for technical specifications, application instructions and supported compliance statements.
PREPARE YOUR ENQUIRY
Information to include with an equipment enquiry
Provide the available information for the relevant task:
Asset & application
- the pipeline, component or coated item;
- whether the requirement concerns coating or wrap, cathodic-protection connection, test access, monitoring or coating inspection;
- substrate, dimensions and configuration;
- worksite environment, access and hazardous-area requirements;
Technical requirements
- the coating system, manufacturer and specified thickness where relevant;
- the applicable project specification, standard or operator requirement;
- required detector type, electrode or test method where already determined by the project;
- required test-station function, terminals, enclosure and drawings where relevant;
- required product documents, calibration or service records;
Supply & timing
- quantities, location and required date; and
- whether the enquiry concerns purchase or selected equipment hire.
These details help identify the appropriate product route and any further information required. Final design, test settings, installation, inspection and acceptance remain the responsibility of the relevant competent parties.
COMMON QUESTIONS
Questions about corrosion-control equipment
What support does this page cover?
This page covers equipment supply and product guidance. Corrosion engineering, cathodic-protection system design, certification and inspection approval must be separately scoped and confirmed with appropriately competent parties.
What is a holiday detector?
A holiday detector is equipment used to identify discontinuities in a non-conductive coating over a conductive substrate. The coating type and thickness, applicable standard, inspection procedure and current manufacturer guidance determine the detector, electrode and settings requiring review.
What information helps narrow a holiday-detector requirement?
Provide the coating type and specified thickness, item or pipe geometry, inspection environment, applicable procedure or standard, preferred portable or in-plant arrangement, required electrodes and any calibration or documentation requirements.
Discuss a corrosion-control equipment requirement
Send the task, product or coating-system details, applicable project requirements, location, quantities and required timing so Tremco Pipeline Equipment can identify the relevant equipment route and current information.










































































