RCSL Corrosion Monitoring
Two Inch System Access Fitting Assemblies (Triseal®)
TRISEAL two-inch access fittings support insertion and retrieval of monitoring probes, injection quills and sampling devices while a pipeline or vessel remains operational. Assemblies are available in multiple materials and configurations.
Product information
View Two Inch System Access Fitting Assemblies (Triseal®) on the RCSL website for manufacturer details. Check the current documentation for the selected model and configuration.
Assembly specifications and selection
An assembly combines the access fitting body with a solid or hollow plug and, optionally, a protective cover. RCSL lists ASME B31.3, API RP 14E, ASME/ANSI B16.5 and NACE MR-0175 as design references. These are manufacturer catalogue references, not a certification of a particular supplied assembly.
| Selection item | Options and checks |
|---|---|
| Mounting | Flare-weld, butt-weld, 2-inch socket-weld, 2-inch NPT, ANSI RJ/RF/FF flange or API flange. |
| Tee arrangement | Non-tee or ¼, ½, ¾ and 1-inch tee connections; drilled, NPT, socket-weld and flanged options. |
| Body material | Carbon steels, 316/304 stainless steel, duplex/super duplex and other specified alloys. Confirm grade and process compatibility. |
| Plug | Solid or hollow; select material and seal package separately. Hollow plug seal options are limited to the designated options in the manufacturer chart. |
| Cover | Plain, cable/probe-adaptor hole, hydrogen-probe cover or pressure-retaining configurations with bleed valve/gauge options. |
| Coating | Select separately; standard phosphate coating is restricted to carbon steel. |
Non-tee fitting dimensions
| Configuration | Height | Weight |
|---|---|---|
| Flare-weld | 133.35 mm (5.25 in) | 2.5 kg |
| Butt-weld | 133.35 mm (5.25 in) | 2.5 kg |
| Socket-weld | 158.75 mm (6.25 in) | 2.05 kg |
| NPT | 158.75 mm (6.25 in) | 2.05 kg |
| Flange 150 | 133.35 mm | 4.76 kg |
| Flange 300 | 133.35 mm | 5.22 kg |
| Flange 4/600 | 158.75 mm | 6.92 kg |
| Flange 9/1500 | 158.75 mm | 13.95 kg |
| Flange 2500 | 158.75 mm | 18.15 kg |
The non-tee sheet specifies −28.9 to +176°C and 6000 psi (410 bar), or the applicable flange rating. Do not apply this limit to every tee, seal or assembly configuration.
Standard tee sizes
| Tee | Height (in) | Weight (lb) |
|---|---|---|
| ¼ in | 5.25 | 4.5 |
| ½ in | 6.25 | 5.75 |
| ¾ in | 6.25 | 6.5 |
| 1 in | 7.25 | 7 |
Flanged tee dimensions and weights differ by ANSI RF/RJ or API class; use the linked tee-fitting table for the selected combination. Standard plug assembly examples are hollow 700952-217-1 and solid 700120-111-1. Materials, seals and coating change the complete order code.
Common cover and maintenance selections
| Item | Catalogue code |
|---|---|
| Cover with plain hole | 700732 |
| Cover without hole | 700734 |
| Cover with ½-inch NPT probe-adaptor hole | 700732E |
| Hydrogen-probe cover | 700732B |
| Pressure-retaining plain cover | 700480P |
| Pressure-retaining cover with bleed valve | 700480 |
| Pressure-retaining cover with bleed valve and gauge | 700481 |
| Pressure-retaining cover with bleed valve, gauge and ½-inch NPT hole | 700482 |
| Thread tap / thread die assembly | 700111 / 700112 |
| Seat reamer / thread brush | 700113 / 700114 |
Cover codes require the specified material, O-ring and coating suffixes. The linked ordering charts retain the complete available combinations.
Source: RCSL Product Catalogue 2019, PDF pages 4–10. Values describe the published manufacturer configuration; confirm current materials, ratings and compatibility before specification or ordering.
Discuss your requirements
Include the model, intended application, process conditions and existing connection details in your enquiry. Confirm suitability, the current manufacturer documentation and availability with Tremco before specifying or ordering equipment.

