28-30″ Internal Pneumatic Clamp (IPC28-30)

The 28-30" Internal Pneumatic Clamp (IPC28-30) is an internal pneumatic line-up clamp for aligning adjoining pipe ends before welding. The model-specific features and technical specifications are listed below.

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • Filters, lubricators, regulators and valves all rated to 250 psi
  • Fully hardened dowel pins
  • Nose cone made of seamless 4130 steel for durability
  • Clamp frame is built using 2″ x 3⁄8″ angle iron and 11⁄4″ x 1⁄4″ WT square tubing to create a strong, durable frame
  • Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
  • Darby uses only the highest quality high pressure quick exhausts
  • Air tubes are electro statically plated to reduce corrosion
  • Ridgid Mounted Two Stage Stainless Steel Air Tank
  • Remote operated by reach rod
  • Most clamps can cover two pipe sizes through the use of conversion kits
  • All powered clamps have a 25° climbing capability
  • Powered line travel on models 16″ to 60″ for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range 28″ – 30″ (711 – 762 mm)
Wall Thickness Range .125″ – .500″ (3.18 – 12.7 mm) on 28″ (711.2 mm)
.125″ – .750″ (3.18 – 19.05 mm) on 30″ (762 mm)
Standard Length 125″ (3175 mm)
Width 25″ (635 mm)
Height 25″ (635 mm)
Weight 1260 lbs (572 kg)
Working Air Pressure 180 – 220 psi
Air Motor 1.9 hp Cleco
Air Tank 30 gal w/ 3 gal reserve
Clamping Shoes 32 total clamp shoes, 16 on each section
Cylinder 10″ (254 mm)
Climbing Capacity 25° + slope

Discuss your requirements

Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.

Contact Tremco Pipeline Equipment