RCSL Corrosion Monitoring
Model HPH Hydraulic Retriever and Service Valve Kits
The RCSL Model HPH is a fixed-length, single-cylinder hydraulic retriever for two-inch access systems. The pressure-balanced tool uses a hydraulic piston and socket adaptor with Triseal solid or hollow plugs. Kit selection depends on working pressure, probe length and the available removal clearance.
Hydraulic retrieval system
The HPH uses a fixed-length, single-cylinder arrangement with a hydraulic piston. Its socket adaptor interfaces with standard Triseal two-inch solid or hollow plugs. Internal devices limit excessive pressure differences across the piston.
Selecting the kit
The datasheet contains separate 250 bar and 450 bar kit tables covering maximum probe lengths from 130 to 900 mm. Check the corresponding cylinder length, removal clearance and kit weight for the selected configuration. Pump, seal-kit and valve part numbers are also provided.
These details summarise the linked RCSL Rev. 01 datasheet. Confirm current specifications and suitability before ordering. Only appropriately trained personnel should operate this equipment under manufacturer instructions and site procedures.
Product information
Review the manufacturer datasheet for dimensions, configurations and ordering information. Confirm current suitability and availability with Tremco before selection.
Model HPH Hydraulic Retriever and Service Valve Kits manufacturer datasheet (PDF)
Operation and maintenance must follow the applicable manufacturer instructions and site procedures, by appropriately trained personnel.
HPH selection tables
250 bar maximum working pressure
| Kit code | Max probe (mm) | Clearance (mm) | Cylinder (mm) | Retriever (kg) | Kit (kg) |
|---|---|---|---|---|---|
| 700834 | 130 | 840 | 510 | 15.75 | 46.5 |
| 700835 | 200 | 945 | 615 | 17.2 | 48 |
| 700836 | 300 | 1096 | 765 | 18.7 | 49.5 |
| 700837 | 400 | 1245 | 915 | 20.5 | 51.5 |
| 700838 | 500 | 1395 | 1065 | 22 | 53.5 |
| 700839 | 600 | 1545 | 1215 | 23.7 | 55.5 |
| 700840 | 700 | 1695 | 1365 | 25.6 | 58 |
| 700841 | 800 | 1845 | 1515 | 27.7 | 60.5 |
| 700842 | 900 | 1995 | 1665 | 29.85 | 64 |
450 bar maximum working pressure
| Kit code | Max probe (mm) | Clearance (mm) | Cylinder (mm) | Retriever (kg) | Kit (kg) |
|---|---|---|---|---|---|
| 701100 | 130 | 840 | 510 | 20.75 | 54.5 |
| 701101 | 200 | 945 | 615 | 22.2 | 56 |
| 701102 | 300 | 1096 | 765 | 23.7 | 57.5 |
| 701103 | 400 | 1245 | 915 | 25.5 | 59.5 |
| 701104 | 500 | 1395 | 1065 | 27 | 61.5 |
| 701105 | 600 | 1545 | 1215 | 28.7 | 63.5 |
| 701106 | 700 | 1695 | 1365 | 31.6 | 64 |
| 701107 | 800 | 1845 | 1515 | 32.7 | 68.5 |
| 701108 | 900 | 1995 | 1665 | 39.85 | 72 |
| Spare | 250 bar code | 450 bar code |
|---|---|---|
| Retriever seal kit | 700868 | 701109 |
| Service valve seal kit | 700877 | 701110 |
| Hydraulic pump | Confirm with supplier | 701111 |
| Three-way valve | 700844 | 701112 |
The source repeats code 700842 for both the 250 bar / 900 mm kit and the hydraulic pump. Confirm the pump code with the manufacturer before ordering. Table weights and lengths are retained as published and require confirmation against the current kit drawing.
Source: RCSL Product Catalogue 2019, PDF pages 14–15. Values describe the published manufacturer configuration; confirm current materials, ratings and compatibility before specification or ordering.
Discuss your requirements
Include the model, intended application, process conditions and existing connection details in your enquiry. Confirm suitability, the current manufacturer documentation and availability with Tremco before specifying or ordering equipment.

