8″-14″ Pipe Facing Machine
The 8"-14" Pipe Facing Machine is a pipe-facing machine for machining the pipe end to the required weld preparation. The model-specific features and technical specifications are listed below.
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Interchangeable clamping sections – each section can clamp up in at least two different pipe sizes
- Easily adapts to any bevel configuration including modified “J” bevel for automatic welding
- Brush adapters clean the inside and outside of the pipe during facing operation
- Parker PrestoLok Fittings
- Variable hydraulic feed with fast feed option
- Counter clockwise rotation (facing the flywheel)
- Precise feed control for metering depth of cut
- Dovetail Gibb design tool block to reduce chatter
Technical Specifications:
| Length | 8″ (203.2 mm) and 10″ (254 mm) pipe – 931⁄2” (2,374.9 mm) 12″ (304.8 mm) and 14″ (355.6 mm) pipe – 941⁄2” (2,400.3mm) |
| Width | 8″ (203.2 mm) and 10″ (254 mm) pipe – 611⁄2” (1,562.1 mm) 12″ (304.8 mm) and 14″ (355.6 mm) pipe – 611⁄2” (1,562.1 mm) |
| Height | Min Height 607⁄16” (1,535.1 mm) Max Height 757⁄16” (1,916.1 mm) |
| Weight | 8″ – 10″ pipe 3,250 lbs (1,477.27 kg) 12″ – 14″ pipe 3,300 lbs (1,522.75 kg) |
| Operating Pressure | Rotation: 2000 psi (137.9 bar) @ 40 gpm max Feed: 600 psi (41.4 bar) @ 2 gpm max Clamp: 350 psi (24.1 bar) |
| Cutting Speed | 226 Surface Feet @ 100 rpm – 8″ (203.2 mm) Pipe 281 Surface Feet @ 100 rpm – 10″ (254 mm) Pipe 334 Surface Feet @ 100 rpm – 12″ (304.8 mm) Pipe 367 Surface Feet @ 100 rpm – 14″ (355.6 mm) Pipe |
Discuss your requirements
Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.
Contact Tremco Pipeline Equipment
