10″ Internal Pneumatic Clamp (IPC10)


The 10" Internal Pneumatic Clamp (IPC10) is an internal pneumatic line-up clamp for aligning adjoining pipe ends before welding. The model-specific features and technical specifications are listed below.

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • Filters, lubricators, regulators and valves all rated to 250 psi
  • Fully hardened dowel pins
  • Nose cone made of 5⁄8″ diameter CF round bar
  • 3 Section Clamp – No frame – Nose cone only
  • Three section, self-centering clamp has an extra clamping section to assure proper line-up in the pipe to avoid lost time for high-low adjustments. *Standard in sizes 10″ through 14″
  • Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
  • Air tubes are electro statically plated to reduce corrosion
  • Spring mounted air tank
  • Remote operated by reach rod

Technical Specifications:

Pipe Size Range 10″ (254 mm)
Wall Thickness Range .125″ – .5″ (3.18 – 12.7 mm)
Standard Length 68″ (1727.2 mm)
Width 10″ (254 mm)
Height 10″ (254 mm)
Weight 235 lbs (107 kg)
Working Air Pressure 180 – 220 psi
Air Motor Non Powered
Air Tank 2 gal
Clamping Shoes 15 total clamp shoes , 12 shoes at the joint (6 on each section) 3 shoes on rear section
Cylinder 6″ (152 mm)
Climbing Capacity N/A

Discuss your requirements

Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.

Contact Tremco Pipeline Equipment