PIPELINE EQUIPMENT SOLUTIONS
Pipeline pig tracking equipment
Pipeline pig tracking equipment serves an important purpose: establishing where a pig or tool is and confirming its progress through the line. Different components contribute to this in different ways. A transmitter on the pig emits a signal, a locator or receiver follows that signal, fixed detectors confirm passage at defined points, and recording or communication equipment logs and reports those detections or positions. Manufacturers use these terms inconsistently, so the components chosen must be checked together, against the manufacturer’s documentation, to confirm that they work as one system and deliver the tracking outcome required.
Tremco Pipeline Equipment’s catalogue includes routes to transmitters, receivers, signallers and above-ground monitoring equipment. This page explains the equipment categories and the information needed for a useful enquiry without assuming that components from different systems are compatible.
Tracking, locating and passage indication are related but different
| Requirement | Equipment route to review | Important qualification |
|---|---|---|
| Generate a detectable signal from a pig or tool | Transmitter | Frequency, fit, service, runtime and approval requirements are model-specific |
| Find or follow a transmitter-equipped pig or tool | Portable or vehicle-supported receiver/locator | Detection performance depends on the complete system and deployment conditions |
| Confirm passage at a defined pipeline point | Passage signaller | Intrusive and non-intrusive products have different installation and project requirements |
| Record or communicate information along a route | Above-ground marker or connected monitoring product | Data, power and communications functions vary by model and configuration |
This table is a category guide, not a compatibility or installation decision.
Explore tracking-equipment categories
01
Transmitters
Transmitters are selected with the pig or tool, receiver system, required signal arrangement and pipeline conditions in mind. Review the CDI electromagnetic transmitter range and relevant Girard pig tracking products, then confirm the exact system requirements with current manufacturer information.
02
Tracking receivers and locators
Receivers are used to detect, locate or monitor a compatible transmitter or tool signal. Start with the CDI tracking receiver range and SPY pig tracker range. Model capabilities, software, accessories, approvals and compatibility must be verified for the intended deployment.
03
Pig passage signallers
Passage signallers provide confirmation at a defined point rather than performing the same role as a portable tracking receiver. Browse CDI pigging signallers and review the applicable product source for the installation, indication and output requirements.
04
Above-ground markers and monitoring
Above-ground markers can provide location, passage-recording or communications functions according to the selected system. Review the CDI above-ground marker route and identify the required local, recorded or remote output in the enquiry.
Information to provide with a tracking-equipment enquiry
Include the information that is available and appropriate to disclose:
- the pig, inspection tool or other item to be detected;
- the required outcome: locate, follow, confirm passage, log an event or communicate a result;
- pipeline material, nominal dimensions and available wall/burial information;
- terrain, access and intended deployment points;
- expected run distance and duration;
- known transmitter, receiver, signal or frequency information;
- whether monitoring is fixed, portable or vehicle-supported;
- required local indication, data recording, connectivity or notification;
- environmental, hazardous-area or project-approval requirements;
- project location and required timing; and
- any existing system components that must be assessed for compatibility.
Final component selection must follow the applicable current manufacturer documentation and project review.
Related pigging equipment
Tracking equipment does not replace selection of the physical pig, its components or the launch-and-receive arrangement. For those requirements, use the broader pigging-equipment pathway.
Technical information and current product routes
Questions about pig tracking equipment
What is the difference between a pig tracker and a passage signaller?
Do all transmitters work with all receivers?
What is an above-ground marker used for?
Can Tremco Pipeline Equipment identify a system from the pipeline diameter alone?
Discuss a pig tracking requirement
Provide the equipment already in use, the outcome required, available pipeline and route information, project location and timing. Tremco Pipeline Equipment can then direct the enquiry to the relevant product family and current technical source.
For hire enquiries about Traxall 770 and X Series transmitters, view our confirmed equipment hire offering. Contact us to confirm current availability
