6-20″ Primus Pipe Bending Machine (HPBP6-20)

The 6-20″ Primus Pipe Bending Machine (HPBP6-20) is a hydraulic pipe bending machine for forming pipe to the required pipeline alignment. The model-specific features and technical specifications are listed below.

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • The HPBP6-20 has a 31.5 gal (119 L) fuel tank and a 91 gal (344 L) hydraulic tank with 82 gal (310 L) fill capacity. The large hydraulic tank helps keep the oil cooler, extending the life of the hydraulic system.
  • Commercial Intertech four-section hydraulic control valve provides bending operations and optional hydraulic mandrel operation.
  • Machine sideplates are reinforced with stiffeners for optimal frame life. Side plates are 3/4″ (19.1 mm) T1 steel. All welds are preheated, heat controlled and made “in position.”
  • Frame cross tubes supporting the hydraulic cylinders have 3/8″ (9.5 mm) wall thickness.
  • Parker Seal Lok™ hydraulic system prevents leaks and has a working pressure rating of 3,000 psi (206.8 bar).
  • Murphy control panel includes electric start, throttle control, oil pressure, tachometer and hour meter.
  • Hydraulic cylinders can be disassembled without cutting for ease of repair.
  • Pinup is fully reinforced to prevent spreading.
  • 325 Quincy air compressor is hydraulically driven by its own circuit.
  • 10-micron hydraulic return line keeps oil clean to extend the life of the system.
  • Oil cooler in compressor drive circuit keeps the circuit cooled. It continuously circulates, even when the compressor is not running. This extends the life of the hydraulic system.
  • Inner pipe roller provides smooth pipe translation.
  • Darby-designed tracks utilize Berco components.

Performance:

  • Maximum bending force at front of stiffback is 301,600 lbs (136,803 kg).
  • Air compressor provides 240 psi (16.6 bar) for mandrel operation.
  • With engine running at 2,200 rpm, the hydraulic vane pump produces 46 GPM (174 LPM) at operating pressure.

Options:

  • Air-cooled Deutz Diesel Engine
  • Poly Tracks

Technical Specifications:

Length 16′ 7″ (5,054 mm)
Width 7’4″ (2,235 mm)
Height 7’8″ (2,336 mm)
Weight 20,020 lbs (9,081 kg) (w/o bending set)
Engine CAT C4.4 Turbo Diesel, 109 hp @2,200 rpm
Winch WARN 12,000lb Hydraulic Planetary Winch
Air Compressor Quincy 325 LVD Air Compressor w/ hydraulic drive and 30 gal (113.6 L) reservoir
Cylinders Two 8″ (203.6 mm) outboard cylinders w/ 18″ (457.2 mm) stroke
Two 7″ (178 mm) inboard cylinders w/ 6″ (152.4 mm) stroke
One 5″ (127 mm) pin-up cylinder w/ 24″ (609.6 mm) stroke
Hydraulic Pump Denison Dual Pump
Oil Cooler American Industrial
Pipe Bending Machines HPBP 6-20 Primus

Darby Equipment full product catalogue (PDF, 20 pages) — Primus on page 4

Discuss your requirements

Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.

Contact Tremco Pipeline Equipment