10″-12″ Pneumatic Wedge Mandrel – Non Powered
The 10"-12" Pneumatic Wedge Mandrel - Non Powered is an internal pipe-bending mandrel that supports the pipe during bending. The model-specific features and technical specifications are listed below.
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Adjustable for any wall thickness within specified mandrel range.
Can cover 2 pipe sizes through use of conversion kits. - Wedges that are case hardened and bolt on to the wedge plates
- Long wedges reduce the need for shimming
- Grade 8 bolts and the highest quality Parker seals and u-cups
- Tapered wheels eliminate rolling
- Slide locks pull the belly of the mandrels up to eliminate drag in the pipe
- Powerful oversized cylinders provide maximum force
- Equipped with filters, lubricators, regulators & valves that are all rated to 250 psi
- Remote operated by reach rod
Performance:
- High strength alloys used in construction
Technical Specifications:
| Length | 87″ (2210 mm) |
| Width | 10″ (279 mm) |
| Height | 12″ (305 mm) |
| Weight | 475 lbs (216 kg) |
| Air Motor | Non Powered |
| Cylinder | 5″ (127 mm) |
| Working Air Pressure | 180 – 210 psi 180 – 250 psi |
| Pipe Size Range | 10″ – 12″ (254 – 305 mm) |
| Wall Thickness Range | .188″ – .500″ (4.8 – 12.7 mm) 10″ .188″ – .625″ (4.8 – 15.9 mm) 12″ |
Discuss your requirements
Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.
Contact Tremco Pipeline Equipment
