34-36″ Internal Pneumatic Clamp (IPC34-36)


The 34-36" Internal Pneumatic Clamp (IPC34-36) is an internal pneumatic line-up clamp for aligning adjoining pipe ends before welding. The model-specific features and technical specifications are listed below.

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • Filters, lubricators, regulators and valves all rated to 250 psi
  • Fully hardened dowel pins
  • Nose cone made of seamless 4130 steel for durability
  • Clamp frame is built using 2″ x 3⁄8″ angle iron and 2″ x 1⁄4″ WT square tubing to create a strong, durable frame
  • Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
  • Darby uses only the highest quality high pressure quick exhausts
  • Air tubes are electro statically plated to reduce corrosion
  • Extra 1.6 gallon air tank with check valve reserves air for multiple actuations of rear roller brackets
  • Remote operated by reach rod
  • Most clamps can cover two pipe sizes through the use of conversion kits
  • All powered clamps have a 25° climbing capability
  • Powered line travel on models 16″ to 60″ for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range 34″ – 36″ (864 – 914 mm)
Wall Thickness Range .375″ – .750″ (9.5 – 19 mm)
Standard Length 145″ (3686 mm)
Width 31″ (787 mm)
Height 31″ (787 mm)
Weight 2715 lbs (1232 kg)
Working Air Pressure 180 – 220 psi
Air Motor (2) 2.7 hp Drive Motors
Air Tank 80 gal w/ 1.6 gal reserve
Clamping Shoes 36 total clamp shoes, 18 on each section
Cylinder 12″ (305 mm)
Climbing Capacity 25° + slope

Discuss your requirements

Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.

Contact Tremco Pipeline Equipment