16-18″ Internal Pneumatic Clamp (IPC16-18)
The 16-18" Internal Pneumatic Clamp (IPC16-18) is an internal pneumatic line-up clamp for aligning adjoining pipe ends before welding. The model-specific features and technical specifications are listed below.
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Filters, lubricators, regulators and valves all rated to 250 psi
- Fully hardened dowel pins
- Nose cone made of seamless 4130 steel for durability
- Clamp frame is built using 11⁄2″ x 3⁄8″ angle iron to create a strong, durable frame
- Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
- Darby uses only the highest quality high pressure quick exhausts
- Air tubes are electro statically plated to reduce corrosion
- Two Stage Stainless Steel Air Tank: Rigid mounted air tank for 40′ joints; Large trailer tank for 60′ and 80′ joints available
- Remote operated by reach rod
- Most clamps can cover two pipe sizes through the use of conversion kits
- All powered clamps have a 25° climbing capability
- Powered line travel on models 16″ to 60 ” for easy operational mobility through the pipe
Technical Specifications:
| Pipe Size Range | 16″ – 18″ (406 – 457 mm) |
| Wall Thickness Range | .125″ – .500″ (3.18 – 12.7 mm) on 16″ (406 mm) .125″ – .750″ (3.18 – 19.0 mm) on 18″ (457 mm) |
| Standard Length | 100″ (2540 mm) |
| Width | 14″ (356 mm) |
| Height | 14″ (356 mm) |
| Weight | 545 lbs (247 kg) |
| Working Air Pressure | 180 – 220 psi |
| Air Motor | .9 hp Cleco |
| Air Tank | 10 gal w/ 3 gal reserve |
| Clamping Shoes | 16 total clamp shoes, 8 on each section |
| Cylinder | 8″ (203 mm) |
| Climbing Capacity | 25° + slope |
Discuss your requirements
Tell us which equipment you are considering and what you need it to do. Tremco Pipeline Equipment can help you review the available product information and the details needed for an enquiry.
Contact Tremco Pipeline Equipment
