PIPELINE MAINTENANCE EQUIPMENT
Maintenance Equipment
Browse pipeline maintenance equipment that includes flowstop bags, pigging, pig tracking, bolt on leak repair clamps, integrity repair, gas recovery, hot tap & line stop fittings, degaussing and air movement. View the different manufacturer ranges below and follow product links for equipment details, available documents and application information.
EQUIPMENT SELECTION GUIDANCE
Maintenance equipment by category
Tremco Pipeline Equipment’s maintenance catalogue covers a wide range of products across flow stopping, pigging, pig tracking, leak repair clamps, steel compression sleeves, hot tap and line stop fittings, air movers and gas recovery/cross compression.
01
Repair sleeves, clamps and fittings
Explore Petrosleeve steel compression repair sleeves and the PLIDCO range of pressure containing bolt-on repair clamps (BORC), weld-on containment sleeves and fittings.
As a general rule, a Petrosleeve is used to reinforce a defect that isn’t leaking, while PLIDCO fittings are used to stop a leak or replace a section.
This catalogue overview is a route to product information, not confirmation that a product suits a particular repair. Suitability for your pipe, pressure and product must be confirmed with us, the manufacturer and your integrity engineer.
Contact us for recommendations.
02
Pigging and pig tracking
Girard Industries the original foam pig manufacturer provides poly pigs, mandrel (steel body) pigs, fully molded urethane pigs, cups, discs, wire brushes and inflatable urethane spheres.
CDI manufactures non-intrusive pig signalers, transmitters, receivers, geo phones, above-ground markers (AGM) and live pig tracking systems for on and offshore pigging applications.
03
Hot tap and line stop fittings
Weldfit includes high pressure hot-tap and line-stop fittings, low pressure hot tap fittings alongside automated pig-launching equipment. All pipeline details are required to quote accurately.
Pipe diameter, wall thickness, material grade, temp range, design factor, carbon equivalent, style of fitting, branch size, flange type and any other relevant details like if a weld test piece is required of same heat numbers as fitting and if there are any third party testing requirements.
04
Gas and liquid recovery equipment
The ZEVAC section is for those interested in product recovery / cross compression equipment and gives more details on individual models for different volumes and pressures.
Let us know the product (gas, multiphase or liquid) application, pressures, system conditions and planned maintenance activity as well as any time constraints so the correct model can be confirmed.
CDI · EQUIPMENT RANGE
Pigging Signalers
CDI pig-passage indicators and related accessories.
Non-Intrusive Signalers and Accessories
Traxall Pig Tracking Transmitters – 22Hz and 15-32Hz
Pig Tracking Transmitters
CDI · EQUIPMENT RANGE
Tracking Receivers
CDI receivers for locating and tracking pipeline pigs.
More about Girard Industries
UNMATCHED PERFORMANCE WITH PROVEN RESULTS
MANUFACTURING SUPERIOR PIPELINE CLEANING
SOLUTIONS SINCE 1968
More about Industrial Degauss
More about Petro-Line
Clients have saved millions of dollars on pipeline repairs in the USA, Canada, Australia, France, Mexico, Dominican Republic and Papua New Guinea on pipes ranging from 3″ to 48″. The PETROSLEEVE® exceeds code requirements, and as of 2019 over 30,000 installations have been completed without reported failure.
The PETROSLEEVE® and can be installed, ready to be coated and backfilled in just 1 hour.
The PETROSLEEVE® comes with complimentary EIP Analysis and Documentation Software, and is a simple repair method that can be completed regardless of weather conditions or user expertise.
The PETROSLEEVE® can repair wide range of defects on any type of pipeline, such as natural gas, sour gas, crude oil, high vapor products, and refined products..
More about Plidco
More about Texas Pneumatic Tools
Hot tap fittings: technical overview
- Size-on-size or reduced branch fittings for use in hot tapping operations
- Supplied with ANSI class 150, 300, 600, 900, or 1500 flanges with raised face or RTJ grooves. Other flange classes available on request.
- Fittings available with a butt weld outlet, ready to be welded to a valve or other fitting
- Standard fittings meet the requirements of ASME B31.3 and ASME B31.4/B31.8
- Fittings with outlets through 48″ NPS utilize extruded outlets, which allows for 100% radiographic examination and eliminates the stress risers inherent in welded type tees
- Compatible with all major models of hot tapping equipment
- All pressure containing welds are 100% radiographed
- Backing strips available
- Manufactured in compliance with WeldFit’s ISO 9001:2015 certified quality program
About ZEVAC recovery technology
ZEVAC is a product and technology company named after our pioneering and patented Zero Emission Vacuum and Compressor units. “ZEVAC®” is an OEM line of portable gas and liquid cross-compression equipment easily integrated into operations and maintenance plans as a safe, reliable, and scalable alternative to natural gas venting and NGL flaring.
Recognized as the industry’s most versatile gas/liquid capture and recovery technology, ZEVAC equipment’s wide range of applications helps the operators that fuel our world and the service contractors supporting them overcome the risk, cost, and compliance challenges of their responsible operating requirements.













































































