RCSL Corrosion Monitoring

Injection and Sampling System

Two-inch injection and sampling systems deliver treatment chemicals or collect process-fluid samples for analysis. Configurations range from open tubes to atomising heads for petroleum, chemical and water-treatment applications.

RCSL Injection and Sampling System

Product information

View Injection and Sampling System on the RCSL website for manufacturer details. Check the current documentation for the selected model and configuration.

Technical information and selection

The two-inch retrievable system comprises a tee access fitting, solid plug, injection/sampling nut, tube or nozzle, and the appropriate nipple, shut-off valve and optional check valve. Standard nut, quill, nipple and valve material is 316 stainless steel; standard nut sealing uses one Viton O-ring and two PTFE backup rings.

Tube type Selection purpose
X Open Open-ended tube using process turbulence; injection rate controlled at pump or shut-off valve
X Quill Scarf/quill end promotes dispersion; the catalogue specifies good dispersion at product velocity of 4.6 m/s or greater
X NPT Threaded end accepts a compatible nozzle assembly
X Head Integral head takes cap/core components for atomised injection

Selection depends on injection rate, pump-to-process pressure differential, temperature, viscosity, specific gravity, spray angle and coverage. The catalogue describes available injection rates from 0.38 to 250 litres/hour. Centre-line injection generally uses the highest fluid velocity; a flush arrangement may be required where pigging prevents a projecting tube. Sampling tubes normally have a straight-cut rather than scarf-cut end.

Ordering parameter Catalogue options
Tube/NPT sizes 1/8, 1/4, 1/2 or 3/4 inch
Open/quill/NPT tube lengths 1.25 to 30 inches
X Head lengths 2.25 to 30 inches
Length increments 1/8 inch
Tube schedules 80, 160, XXS or specified alternative
Shut-off valve NPT sizes 1/4, 1/2, 3/4 or 1 inch
Valve pressure options 6000 or 10000 psi, selected separately from complete-system rating

Not every material, size and schedule combination is available. Nozzle-capacity values below are reproduced in the catalogue’s GPH units at the stated pressure differential; they are not a complete-system pressure rating.

Product code(s) Nozzle style 40 psi GPH 60 psi GPH 80 psi GPH 100 psi GPH
700030 /700034 /700038 0.30; female NPT / flush / cap-core 0.3 0.36 0.42 0.48
700031 /700035 /700039 0.40; female NPT / flush / cap-core 0.4 0.48 0.56 0.64
700032 /700036 /700040 0.60; female NPT / flush / cap-core 0.6 0.72 0.84 0.96

Source: RCSL Product Catalogue 2019, PDF pages 151, 152, 153, 154, 155. Confirm current specifications and the complete assembly configuration before ordering.

Discuss your requirements

Include the model, intended application, process conditions and existing connection details in your enquiry. Confirm suitability, the current manufacturer documentation and availability with Tremco before specifying or ordering equipment.

Contact Tremco Pipeline Equipment